Silver-Bond 5 Super Electrically Conductive, Silver Epoxy Adhesive, 1 Part Heat

SUPER CONDUCTIVE SILVER EPOXY ADHESIVE - ONE PART
PRODUCT DESCRIPTION:
Silver-Bond 5 Super Electrically Conductive, Silver Epoxy Adhesive, 1 Part Heat Cure Only is a single component epoxy, formulated with pure silver powder combined with organic binders and solvents to produce electrically conductive paths, films or patterns over non-conductive substrates.
Silver-Bond 5 Super Electrically Conductive, Silver Epoxy Adhesive, 1 Part Heat Cure Only shows slight settling when stored for a long period of time, no caking and will re disperse to a smooth homogeneous state.
Silver-Bond 5 Super Electrically Conductive, Silver Epoxy Adhesive, 1 Part Heat Cure Only formulation produces electrically conductive paths on a wide variety of surfaces including plastics, rubber, cloth, thermoplastic, paper, wood and many others.
Silver-Bond 5 Super Electrically Conductive, Silver Epoxy Adhesive, 1 Part Heat Cure Only is designed for use in diversified applications such as microwave EMI & RFI shielding, in the assembly or repair of printed circuit boards, wave-guides, electronic modules, flat cable, static shielding, connections and circuitry. This epoxy is designed for screening and micro product adhesion applications with the best dispensing capabilities of up to 30 gauge / 0.01"/ 0.255mm.
PRODUCT PROPERTIES
Appearance
Silver
Cure Type
Heat Cure
Benefits
High strength
Perfect bond
EMI & RFI shielding
Wave guides
The best dispensing capabilities of up to 30 gauge/0.01"/0.255mm
Substrates
Integrated Circuits
Aluminum
Copper
Magnesium
Steel
Bronze
Nickel
Kovar
Ceramic
Glass
Phenolic
G-10 epoxy glass boards
Catalyst
Anhydride
Hardness, Shore D
83
Typical Application
microwave EMI & RFI shielding, in the assembly or repair of printed circuit boards, wave-guides, electronic modules, flat cable, static shielding, connections and circuitry.
CURE SCHEDULE
15 min
@ 120C, 248 F
10 min
@ 150C, 302F
5 min
@ 175C, 347F
UNCURED PROPERTIES
Viscosity @ 25 C cps
6,800
Density gm/cc
2.35
Silver , %
70-72
Shelf life
6 Months
Operating Temperature
-45C to 170C
Pot Life @ 25 C
6 months @ 25C
PHYSICAL CHARACHTERISTICS
Sheet Resistivity
10-12 m/sq
Adhesion Tensile Strength
1000 N/cm2 (1500 lb/in2)
Lap shear Strength
1400 N/cm2 (2000 lb/in2)
Thermal Conductivity
0.04J/(cm.s. C):[0.01cal/(cm.s. C)]
Specific heat
0.30J/(g. C) :[0.07 cal/g. C]
Coefficient of Thermal Expansion
3x10-5 (m/m)/ C
Modulus of Elasticity
4x1010 Pa (6x105lb/in2)
Poissons Ratio
0.35
ELECTRICAL PROPERTIES:
Volume Resistivity
< 0.001
GENERAL INFORMATION:
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
HOW TO USE:
1) Carefully clean and dry all surfaces to be bonded.
2) Apply Silver-Bond 5 Super Electrically Conductive, Silver Epoxy Adhesive, 1 Part Heat Cure Only completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.